How To Paint Bedroom Doors

Painting your bedroom wood doors is an easy way to change the look of your room without spending a lot of money.
Painting bedroom wood doors can be done in a short time and if you do it right, it will last for years.
Here’s how.
First, you need to decide whether you will remove the door from the frame.
If you are painting a small closet wood door or sliding glass door, you should leave it in place.

What Do I Need To Paint A Door?

You’ll need good brushes, paint, a paint tray, and painter’s tape (also known as masking tape).

A good quality 2.5-inch Angled Sash from purdy is perfect.

How Do You Paint Doors the Right Way?

Whether you are painting your bedroom wood doors to add a pop of color or just to make a boring door look new, painting your bedroom doors can update your bedroom.

Painting a wood door is an easy project that requires very little skill on the part of the painter.

All you need to do is lightly sand the entire door with
(220) sandpaper or a fine sanding sponge.


And then paint it using latex paint.
Tape off any hardware using masking tape.

Repaint Doors And Trim

If you want to repaint wood doors and trim I suggest you use a semi-gloss finish.
You could go with a higher sheen such as high-gloss but a semi is what 90% of homeowners use.

Related Article What’s The Best Paint Finish?

How To Paint An Old Wood Door

The trick to painting an old wood door is to make sure you remove all the old paint from it. This will ensure that the new paint adheres properly and that it doesn’t peel off again later on.

You’ll also want to sand down the door so that the surface is smooth.

Then apply a coat of primer to ensure that the new paint sticks.

If you’ve never painted a door before, this might seem like an intimidating task, but it’s really not that hard once you know how to do it.

Step 1 — Remove Old Paint

First, remove any peeling paint with a scraper or sandpaper.

Then use some medium-grit sandpaper (120 grit) and work your way up to high-grit sandpaper (220 grit). If you don’t own sandpaper of this quality, try finding some at your local hardware store.

Peeling paint on wood door

Step 2 — Apply Primer

Once the wood door is completely smooth, apply a coat of primer.

This will help ensure that the new paint sticks properly.

The primer will also help fill any nicks or scratches in the wood that may have made it harder for the previous coat of paint to stick.

The best primer for bare wood is an oil-based primer because it will block any stains from bleeding through.

Related Article Best Oil Based Primers For Wood And More

You only need to spot prime all bare spots.

If you stripped the wood door completely bare then you need to prime the entire door.

How To Paint MDF Doors

how to paint mdf doors
You can paint an MDF door with just about any type of paint you like.

Method:

Seal the MDF door with a primer before you start.
This will allow the paint to adhere better.

You should also use a primer on bare wood if you want a really good finish, but this isn’t essential.

To seal the MDF, you need to apply two coats of primer allowing it to dry between coats. When the primer has dried you simply apply your topcoat.

You will have to use an oil-based primer.

Related Article Best Oil Based Primers For Wood And More

However, it is best to avoid emulsion as the finish will be too shiny and in some cases not durable enough to withstand normal wear and tear.

Typically, I would recommend using enamel paint as these are very durable and will last longer than other types of paint.

Other paints tend to become chipped, scratched, or damaged more easily.


Make sure all your paintbrushes are clean and in good condition if you are using expensive paints as cheap brushes can leave brush marks that spoil the finish of your door when it dries.

Related Article 8 Quick Tips To Paint Furniture And Avoid Brush Strokes

How To Paint A Sliding Door

How to paint sliding wood doors

Painting a sliding door is best done by starting with any decorative features, working from the inside of the door out.

Always paint out of corners, not into them, to avoid creating paint deposits and clumps.

Paint in the direction of the wood grain to minimize brush strokes.

Related Article Paint French Doors WITHOUT masking tape

Should You Use A Roller To Paint Doors?

The best finish on doors without grain can be achieved by spraying them with a paint sprayer.

However, you can get great results by using a microfiber 3/8 inch mini roller.

Semi-Gloss paint tends to dry faster than lower sheen paints.

Related Article What’s The Best Paint Finish?

Therefore adding some Floetrol paint extender will help you keep a wet edge longer.

That will help avoid roller and brush marks.

This is the best mini roller to paint doors from Amazon.

How To Paint Outside Doors

Painting outside doors is basically the same process.

You have to clean the surface and prime any spots that need it.

You will have to use exterior paint instead that is made to withstand extreme weather conditions.

Related Article How To Paint A Metal Exterior Door

Paint uPVC Doors

If your uPVC doors or windows are in good condition and you just want to give them a bit of a facelift then this is the ideal option for you.

TIP: When painting uPVC it is best to use a primer made for uPVC and the highest quality paint you can afford.

Many cheaper paints tend to flake when they come into contact with the plastic material of your door or window frames.

I suggest this uPVC primer for your doors.

If This Article Was Helpful Please Share It!

Leave a Comment